.jpg)
Wardrobe Design Pune
Sliding, hinged, and walk-in wardrobes. HDHMR or plywood, Hettich hardware, internal layout designed to your exact wardrobe — with 3D renders before manufacturing begins.
Quick answer: Wardrobe design in Pune costs ₹1,800–₹2,800 per running foot for HDHMR construction, and ₹2,800–₹5,500/rft for BWR plywood. A standard 6-foot sliding wardrobe runs ₹35,000–₹55,000. A full-wall 12-foot wardrobe costs ₹1.2L–₹2L. Walk-in wardrobes from 60 sq ft start at ₹1.5L. All rates include Hettich/Blum hardware, supply and installation. Pune 2026.
Aura Foundry designs wardrobes internal-configuration-first — hanging, folded, shoes, drawers, loft — so the storage works before the shutter finish is chosen. Every wardrobe is rendered in 3D with your exact room dimensions before manufacturing begins. What you approve is exactly what gets built.
Wardrobe Cost — Pune 2026
| Type | Budget | Mid-Range | Premium |
|---|---|---|---|
| HDHMR / MR board (budget-mid) | ₹1,800–₹2,200/rft | ₹2,200–₹2,800/rft | — |
| BWR plywood carcass (mid-premium) | — | ₹2,800–₹3,800/rft | ₹4,000–₹5,500/rft |
| Walk-in wardrobe (from 60 sq ft) | ₹1.2L–₹2L | ₹2L–₹4L | ₹5L+ |
| Full wall sliding (10–14 rft) | ₹65K–₹1.1L | ₹1.1L–₹2L | ₹2.5L+ |
Per running foot rates include carcass, shutters, internal shelves and drawers, and Hettich/Blum hardware. Loft units priced separately (₹8,000–₹18,000 per bay). Pune 2026 rates.
Six Decisions That Define Your Wardrobe
Most Pune wardrobes fail not because of bad carpentry — but because these decisions were never made before manufacturing began.
Material First — HDHMR vs BWR Plywood
This is the most important wardrobe decision most Pune clients never get a clear answer on. HDHMR (high-density HMR board) is moisture-resistant, screw-holding, and costs 30–40% less than plywood — it is the correct choice for most residential wardrobes in Pune's climate. BWR (boiling water resistant) plywood is stronger, holds screws even better over decades, and is the right choice for heavy-duty wardrobes or areas with significant humidity. We recommend HDHMR for most projects and plywood for master bedroom wardrobes above ₹3.5L.
Sliding vs Hinged — When Each Makes Sense
Hinged wardrobes need clearance in front equal to the door width — typically 18 to 24 inches. If you have that space, hinged doors give better access to the full interior width and are mechanically simpler (no track to maintain). Sliding wardrobes work in rooms where the bed or other furniture limits the floor space in front of the wardrobe. The trade-off: at any given moment, only half the wardrobe is accessible. For rooms under 130 sq ft, sliding is usually the only viable option.
Internal Configuration — Design This in Detail
Most Pune contractors build wardrobes with two hanging sections and two shelves and call it done. The right configuration depends on exactly who uses the wardrobe: how many hanging garments (long vs short), how many folded items, how many shoes, whether there is a safe or a trouser rack, whether the wardrobe holds luggage. We design the internal layout room by room, person by person, before manufacturing begins. Getting this wrong means reorganising the entire wardrobe with external storage within six months.
Shutter Finish — What Actually Ages Well in Pune
Lacquered glass shutters look exceptional and hold their look for 8–10 years — premium choice. Membrane-finish shutters (acrylic or PU) are cost-effective, available in hundreds of colours, and age well if the substrate is good. Laminate shutters are the workhorse — durable, easy to clean, wide colour range, and the most common choice in Pune at mid-range. Veneer shutters give a natural wood look at premium cost but need more care in Pune's humidity. We never recommend paint-finish MDF shutters — they chip within months of daily use.
Hardware Brands — The Part That Fails First
The carcass and shutters last 15–20 years if built correctly. The hardware — drawer runners, hinges, soft-close mechanisms, sliding tracks — is what fails within 3–5 years on cheap wardrobes. Hettich and Blum are the two brands we specify as standard. Both have Pune distributors, both carry a 10-year warranty on their mechanisms, and both have replacement parts readily available. Hafele is an acceptable alternative. Local or unbranded hardware costs ₹3,000–₹6,000 less per wardrobe — and it shows within two years.
Loft Above the Wardrobe — Always Design It In
The space between the top of a standard 7-foot wardrobe and a 9–10 foot ceiling is typically 24–36 inches. Left open, it collects dust and becomes unusable. Designed as a loft unit — with a full-height shutter that matches the wardrobe below — it adds 35–60% more storage volume for a marginal cost increase (typically ₹8,000–₹18,000 per bay). This is the single most underused storage opportunity in Pune apartments. We design loft units in by default unless the client specifically requests otherwise.
Frequently Asked Questions
How much does a wardrobe cost in Pune in 2026?+
A standard 6-foot sliding wardrobe in HDHMR with laminate shutters and Hettich hardware costs ₹35,000–₹55,000. A full-wall 12-foot sliding wardrobe in BWR plywood with lacquered glass shutters runs ₹1.2L–₹2L. A walk-in wardrobe from 60 sq ft starts at ₹1.5L in HDHMR and ₹2.5L+ in plywood with premium fittings. These are supply-and-install rates inclusive of hardware, Pune 2026.
What is the best wardrobe material for Pune's climate?+
HDHMR (high-density moisture-resistant board) is the right choice for most Pune wardrobes. It handles Pune's monsoon humidity better than standard MDF, holds screws well, and costs less than plywood. For master bedrooms where you want a 20-year wardrobe, BWR plywood carcass with HDHMR internal shelves is the upgrade worth making. Avoid particle board (also called chipboard) — it swells at joints in high humidity and does not hold screws over time.
How long does wardrobe manufacturing and installation take?+
Custom wardrobes manufactured in a workshop (the correct approach for quality) take 12–18 days from design sign-off to installation. Modular systems assembled on-site from pre-made components can be faster — 5–8 days — but offer less flexibility in internal configuration. For a full home project, wardrobe manufacturing runs in parallel with civil work so it is rarely on the critical path. For a standalone wardrobe-only project, budget 2.5–3 weeks from visit to installation.
Should I choose sliding or hinged wardrobe doors?+
If the floor space in front of the wardrobe allows 18–24 inches of clear swing arc, hinged doors give better access and are mechanically simpler. Sliding doors are the right choice when that clearance does not exist — typically in rooms under 130 sq ft or where the bed is positioned close to the wardrobe. Sliding doors also suit modern aesthetics better if the rest of the room is minimal. The cost difference is small — sliding track hardware adds ₹4,000–₹8,000 versus standard hinges.
What internal fittings should I include in a wardrobe?+
At minimum: one full-height hanging section (for sarees, kurtas, dresses), one half-height double-hang section (for shirts and folded trousers), 4–6 adjustable shelves, and 2 drawers. Upgrades worth including: a pull-out trouser rack (₹3,500–₹6,000), a shoe rack section at the base (instead of a shelf), and a small drawer with a felt liner for jewellery. A pull-out full-length mirror fitted inside the door is ₹4,000–₹8,000 and eliminates the need for a separate floor mirror.
Can you do a 3D render of the wardrobe before manufacturing?+
Yes — every wardrobe we design is rendered in 3D before manufacturing begins. The render shows the shutter finish, the internal layout, the loft configuration, and how the wardrobe sits in the room relative to the bed and door. Changes in the render cost nothing and take a few hours. Changes after manufacturing begins cost ₹8,000–₹25,000 in rework depending on what needs to change. The render is the most cost-effective part of the process.